lv
 

DALI OPTICON 8 MK2 Tobacco Oak Grīdas tipa akustiskā sistēma (cena par gab.)

DALI OPTICON 8 MK2 Tobacco Oak Grīdas tipa akustiskā sistēma (cena par gab.)DALI OPTICON 8 MK2 Tobacco Oak Grīdas tipa akustiskā sistēma (cena par gab.)DALI OPTICON 8 MK2 Tobacco Oak Grīdas tipa akustiskā sistēma (cena par gab.)DALI OPTICON 8 MK2 Tobacco Oak Grīdas tipa akustiskā sistēma (cena par gab.)DALI OPTICON 8 MK2 Tobacco Oak Grīdas tipa akustiskā sistēma (cena par gab.)DALI OPTICON 8 MK2 Tobacco Oak Grīdas tipa akustiskā sistēma (cena par gab.)
€ 1479.99 Bez atlaides € 1499.00
  • Sazināties
  • Vēlos pasūtīt
Preces kods: OPTICON 8 MK2 TOBACCO OAK

Ja pie šī produkta redzi atzīmi "IR VEIKALĀ" tad dotais produkts ir mūsu veikalā

 1. Vari droši veikt pirkumu On-Line izvēloties piegādes veidu. Ja pirkums On-Line tiks veiksmīgi veikts darba dienā līdz plkst. 12.00, tad šajā pašā dienā tas tiks atdots uz piegādi un saņemsi to norādītajā vietā nākamajā vai aiznākamajā dienā

 2. Vari doties uz mūsu veikalu, kur to varēsi iegādāties uzreiz.

Ja tomēr izvēlētais produkts dotajā brīdī nav mūsu veikalā, sazinies ar mums, veicot tā pieprasījumu un mēs GARANTĒJAM ka piegādāsim to maksimāli īsākajā laikā.

P.S. Rēķins tiks nosūtīts tikai tajā gadījumā, kad mēs par 100% būsim pārliecināti, kad šis produkts ir pieejams ražotāja noliktavā un tā piegāde ir būs bez aizķeršanās!

Vēlies tomēr uzdot mums kādu interesējošu jautājumu? Zvani 22003030

Īss apraksts (angļu val.)
Izvērsts apraksts (angļu val.)
Specifikācija (angļu val.)

DALI OPTICON 8 MK2

The large-scale, floorstanding OPTICON 8 MK2 is the powerhouse of the new OPTICON MK2 family - the only three-way system in the series. The speaker combines immense low frequency bandwidth, volume potential and dynamic accuracy with the extraordinary detail and clarity from the dedicated midrange driver. The OPTICON 8 MK2 offers an extended low frequency profile that suits installation in large listening spaces with more distant room boundaries.

The large-scale, floorstanding OPTICON 8 MK2 is the powerhouse of the new OPTICON range. It combines twin 8” wood fibre cones with a 6½” midrange driver - all incorporating our patented SMC magnet system.

Thanks to its size and true three-way format, the OPTICON 8 MK2 offers a level of performance unavailable from any other OPTICON model. It combines immense low frequency bandwidth, volume potential and dynamic accuracy with the extraordinary detail and clarity that arises from the use of a dedicated midrange driver. High frequencies from the hybrid tweeter are explicitly detailed and informative yet simultaneously smooth and endlessly listenable.

The OPTICON 8 MK2 offers an extended low frequency profile that suits installation in large listening spaces with more distant room boundaries.

The manufacture of the OPTICON MK2 remains fully Danish - as with the MK1 series. Built at our factory in Denmark; from components produced in-house or sourced from the best specialist manufacturers locally and further afield.

The OPTICON 8 MK2 is available in Satin Black and Tobacco Oak.

REFLEX PORTS

As a reflex loaded speaker, the OPTICON 8 MK2 employs the otherwise unused acoustic output from the rear of its bass driver to extend low frequency bandwidth and increase low frequency power handling. We revisited the port tuning to ensure that the subjective bass performance was absolutely optimised for its likely installation application.

With Dual Flare technique, MK2 brings port design into the realm of aerodynamics with exit and entry flares carefully designed to minimise turbulence at the airflow rate expected from the port diameter and tuning frequency.

Dual Flare enables the reflex ports to remain laminar and work effectively to reinforce low frequency performance to a significantly higher volume level than would otherwise be the case.

SMC

DALI SMC (Soft Magnetic Compound) is a coated magnet granular material that can be formed to almost any desired shape and has many advantages used in driver magnet systems. SMC’s unusual combination of very high magnetic permeability and very low electrical conductivity is exactly what is required for driver magnet systems and results in a significant reduction of electro-acoustic distortion.

SMC works primarily by minimising eddy currents in the magnet system pole piece, which reduces distortion. SMC also improves flux linearity within the magnet system - reducing magnetic hysteresis. All of these SMC benefits together produce a significant subjective reduction of low-level detail masking and colouration.

HYBRID TWEETER

SOFT DOME
The new unique light-weight 29 mm soft dome tweeter is derived from CALLISTO C and offers significant advances over the tweeters used in the MK1 series. The relatively small increase in diameter over the previous 28 mm tweeter results in a significant increase in dome radiating area. This means lower distortion, higher power handling, and an ability to operate at lower frequencies.

The use of the same 29 mm soft dome tweeter across all six OPTICON MK2 models results in consistency of tonal character and provides consistency of dispersion characteristics. The MK2 soft dome tweeter enables crossover frequencies as low as 2kHz to be safely employed with no risk of distortion or power handling limitations.

HYBRID TWEETER
The OPTICON 8 MK2 employs a new hybrid tweeter design that marries the 29 mm soft dome tweeter with a custom 17 x 45 mm ribbon. Both mounted on a cast aluminium faceplate, which incorporates dispersion control detailing.

The ribbon element begins to contribute from 10kHz upwards; just as the response of the soft dome element is beginning slowly to fall away and become more directional. The ribbon element both extends the system frequency response towards 30kHz and contributes to keep high frequency horizontal dispersion wider than would otherwise be the case.

The new hybrid tweeter offers the best of both worlds – the clarity, speed and dynamics of a dome tweeter, with the very high frequency detail and smooth finesse of a ribbon tweeter.

The placement of the hybrid tweeter drivers between the two widely spaced bass drivers is done firstly in order to position the high frequency drivers near typical seated ear height. Secondly to take advantage of the smoother low frequency room response that results from spaced bass drivers.

WOOFER

The OPTICON 8 MK2 combines two 8” bass drivers with a 6½” midrange driver - all build around DALI's patented SMC magnet motor system.

Every component of the drivers are carefully designed for its positive contribution towards ideal performance. The diaphragms are made from a mix of paper and wood fibre that ensures minimal break-up resonance and gives the diaphragms their distinctive DALI trademark colour. They are terminated by rubber surrounds chosen for their soft and very flexible mechanical properties that enable free movement with minimal low frequency damping.

The driver chassis for each driver is manufactured in die-cast aluminium that provides extremely high rigidity and low resonance along with minimal extraneous influence on the internal magnet system. The mechanical design of the chassis is specifically engineered to provide minimal impedance to airflow while at the same time enabling extremely tight mechanical bonding with the speaker enclosures.

The OPTICON 8 MK2 driver magnet system consists of a large ferrite ring magnet surrounding a pole piece manufactured entirely of the unique DALI SMC material. The pole piece and the ferrite magnet are secured between soft iron front and back plates to create the appropriate magnetic field for the voice-coil.

The drivers were designed with a consistent focus on the DALI audio principles of low-loss, low distortion and low colouration. The ideal driver plays only what the amplifier requires, with nothing added and nothing subtracted, and at DALI we strive to design and manufacture drivers that approach the ideal as closely as possible.

CABINET

The enclosure of the OPTICON 8 MK2 is designed to optimise rigidity and minimise panel resonance. The 25mm thick front baffle provides massively rigid foundations for the drivers. The floorstanding speaker employs extra internal bracing further to ensure rigidity and practically eliminate panel resonance.

The OPTICON 8 MK2 is supplied with cast aluminium foot components that can be fitted with either black chrome plated floor-spikes or, when installed on sensitive floor surfaces, vibration damping pads. Tools for attaching the foot castings and spikes are included.

The manufacturing of the OPTICON MK2 series has been retained firmly at the DALI factory in Denmark. Our in-house woodworking facility handles everything from cutting and routing the MDF panels to the driver and crossover installation. The final test and quality approval on each and every speaker is also handled on our own assembly lines.

Frequency Range (+/-3 dB) [Hz] 38 - 30,000
Sensitivity (2,83 V/1 m) [dB] 88.5
Nominal Impedance [ohms] 4
Maximum SPL [dB] 112
Recommended Amplifier Power [W] 40 - 300
Crossover Frequency [Hz] 380 / 2,200 / 14,000
Crossover Principle 3 + ½-way
Hybrid tweeter module, Super high freq. driver, Quantity 1 x 17 x 45 mm
Hybrid tweeter module, Super high freq. driver, Diaphragm type Ribbon
Hybrid tweeter module, High frequency driver, Quantity 1 x 29 mm
Hybrid tweeter module, High frequency driver Diaphragm type Soft Textile Dome
Midrange driver, Quantity 1 x 6 1/2"
Midrange driver, Diaphragm type Wood Fibre Cone
Low frequency driver, Quantity 2 x 8"
Low frequency driver, Diaphragm type Wood Fibre Cone
Enclosure type Bass Reflex
Bass Reflex Tuning Frequency [Hz] 29.5
Connection Input Bi-Wiring
Bi-Amping (INT)
Magnetic Shielding No
Recommended Placement Floor
Recommended Distance From Wall [cm] 30 - 150
Dimensions With Base (HxWxD) [mm] 1141 x 241 x 450
Accessories Included Manual
Rubber Feet
Spikes M8
Assembly Tools
Weight [kg] 34