lv
 

MAGNAT MR 780 Stereo pastiprinātājs

MAGNAT MR 780 Stereo pastiprinātājsMAGNAT MR 780 Stereo pastiprinātājsMAGNAT MR 780 Stereo pastiprinātājsMAGNAT MR 780 Stereo pastiprinātājsMAGNAT MR 780 Stereo pastiprinātājs
€ 799.99 Bez atlaides € 999.00
  • Sazināties
  • Vēlos pasūtīt
Līdz atlaides perioda beigām
Preces kods: MR 780

HIGH-END HYBRID VALVE RECEIVER WITH POWERFUL OUTPUT STAGE AND BLUETOOTH® APTX


High-end hybrid receiver with tube preamplifier and a high-performance transistor output stage

High-quality DAB+/FM tuner

Analogue inputs incl. high-quality MM-phono input

Digital input section with 2 optical and 2 coaxial inputs and 1 USB audio input

Bluetooth® input (4.0) with the high-end audio standard Qualcomm® aptX™

Sturdy full-metal enclosure with solid aluminium front plate and controls

Izvērsts apraksts
Specifikācija

The Magnat MR 780 combines elegantly audiophile hi-fi sound with substantial power reserves: Used in the pre-amp stage are high-quality selected and extensively burnt-in ECC 81 valves, ensuring that well-loved, warm sound. The output stage relies on a low-emission toroidal transformer and provides an impressive 100 watts of RMS power per channel at 4 ohms. Added to this is a virtually overwhelming range of connection options for analogue and digital sources, including Bluetooth aptX. Where necessary, a high-quality Wolfson D/A converter takes care of the signal transformation with up to 192 kHz and 24 bits. A phono pre-amplifier for MM systems, an integrated DAB/DAB+ tuner as well as an FM receiver and a large number of further details make the MR 780 one of the best stereo receivers in this price category. This high standard is clear from the very first glimpse. You can see immediately from the full-metal enclosure with its solid, brushed aluminium front panel that this unit belongs in the high-end range.

HIGHLIGHTS
System remote control for all functions
Readable, two-line clear text display with adjustable brightness (3 stages)

AMPLIFIER AND POWER SUPPLY

  • Separate standby power supply for low power consumption in standby mode
  • High-performance power supply with separately stabilised supply voltages for the different tubes and circuits
  • Discrete high-performance amplifier
  • Output power: 100 watts of sine power per channel (4 ohms)
  • High-capacity filter/electrolytic capacitors
  • Shielded toroidal transformer

PREAMPLIFIER

  • MM-phono preamplifier with low-noise operational amplifiers and subsonic filters
  • Low-noise tube preamplifier with 2 x ECC 81 tubes
  • Preselected and burned-in tubes
  • Additional 3.5 mm audio input on the front panel for connecting portable devices
  • Digital inputs (2 x optical and 2 x coaxial) for sampling frequencies up to 192kHz/24bits
  • USB Audio 2.0 input supports sampling frequencies up to 192kHz/24bits
  • Bluetooth® input (4.0) supports the high-end audio standard Qualcomm® aptX™
  • Wolfson digital-to-analogue converter

CONNECTIONS

  • Headphone output with high quality 6.3 mm jack
  • Record Out fixed level output

CABINET

  • Solid aluminium control elements
  • Sturdy full-metal enclosure with solid, brushed aluminium front
  • Stable feet with damping rubber insert
TUNER:  
FREQUENCY RANGE FM 87.5 – 108 MHz
FREQUENCY RANGE DAB/DAB+ 174.928 – 239.2 MHz (Band III)
SENSITIVITY FM -108 dBm
SENSITIVITY DAB/DAB+ -108 dBm
   
AMPLIFIER:  
OUTPUT POWER  
Nominal power:  
20 Hz – 20 kHz, THD < 1.0%, 4 Ω 2 x 100 W
20 Hz – 20 kHz, THD < 1.0%, 8 Ω 2 x 75 W
Peak power: 1 kHz, 4 Ω 2 x 180 W
   
FREQUENCY RESPONSE  
CD/Tuner/Aux/Line/Tape 6 Hz – 90 kHz (-3,0 dB)
  20 Hz – 20 kHz (+/-0,3 dB)
Phono 20 Hz – 20 kHz (+/-0,8 dB)
Subsonic Filter 16 Hz, 18 dB/Oct.
   
S/N RATIO  
CD/Tuner/Aux/Line/Tape/Digital inputs 104 dB (A)
Phono MM 82 dB (A)
   
INPUT SENSITIVITY  
CD/Tuner/Aux/Line/Tape 470 mV/100 kΩ
Phono MM 5 mV/47 kΩ
   
DIGITAL INPUTS 1x USB 2.0, type B connector
  2x optical (Toslink™)
  2x coaxial (cinch)
  Supported sampling frequencies: 44.1/48/88.2/96/176.4/192kHz
  Supported bit depths: 16/24bits
   
BLUETOOTH® INPUT Bluetooth® 4.0 / Qualcomm aptX®
   
MAX. POWER CONSUMPTION Maximal: 300 W, Standby:
   
PREAMPLIFIER FITTED WITH 2x ECC 81 / 12AT7
   
DIMENSIONS (WxHxD) Main unit: 433 x 132 x 317 mm
  Incl. controls and connectors: 433 x 132 x 360 mm
  Remote: 45 x 175 x 20 mm
   
WEIGHT 8.9 kg