Anyone wanting to distribute HDMI signals with maximum resolution of 2160p (UltraHD) in high quality to two parallel devices cannot do without the UltraHD Splitter 1:2 from Oehlbach. High-quality, stringently selected components are accommodated in a solid metal enclosure and guarantee absolutely loss-free signal transmission. 24 carat gold-plated contacts ensure optimum transmission reliability. In addition to video signals, from 80i SD signals to UltraHD 2160p, the UltraHD Splitter 1:2 also doubles all audio formats, whether Dolby Digital, DTS, Dolby TrueHD, DTS-HD MA, PCM or even DSD. The compact device with dimensions of 63.5 x 23 x 62 (wxhxd in mm) weighs in at just 71g.
The Oehlbach UltraHD Switch 3:1 puts an end to the frequent replugging necessary for too many source devices. The device receives signals up to UltraHD resolution of 2160p with three HDMI inputs and transmits the data flow of the desired input to a connected target device without any loss of quality in each case. In addition to the UltraHD video signal, it goes without saying that all audio formats are also supported, up to and including Dolby TrueHD and DTS-HD MA as well as DSD. The three HDMI inputs as well as the HDMI output are 24 carat gold-plated and therefore guarantee the highest possible transmission reliability. The solid metal enclosure is compact with dimensions of 95 x 25 x 86 mm (wxhxd) and weighs just 136 g. A remote control is provided for convenient changing between the individual inputs.
The Falcon HD Wireless HDMI Transmitter guarantees loss-free wireless transmission of HDMI signals in FullHD and 3D. Transmission of the entire 1080p information with very low latency of less than 0.5 seconds is ensured over a range of 30 m with a clear line of sight. In addition, IR signals from the remote control are also transmitted reliably. The Qualcomm Atheros chipset provides for the necessary processing power for the wireless transmission is an optimum manner. The PureVu CNW8302 FullHD media processor ensures loss-free video processing in precise detail. It goes without saying that the Falcon HD is HDCP-compliant and energy-efficient. Thanks to its compact dimensions, it offers many varied set-up options and flexibility.
Scope of delivery: Falcon HD transmitter, Falcon HD receiver, IR emitter with 2.5mm jack plug, IR receiver with 3.5mm jack plug, 2 x HDMI cable – 1.5m, 2 x 5V DC power adaptor
It is not without good reason that the AR9374 wi-fi chip from Qualcomm is the first choice in any devices with high demands concerning data throughput, range and operating stability for wireless data transmission. Its extremely compact format allows the problem-free elimination of any scattering signals, meaning that it can be integrated into our high-quality Oehlback products. With dual-band wi-fi 802.11n, signals up to 300 Mbit/s are transmitted, with the AR9734 providing excellent signal stability even at maximum range.
THE PURECLOCK JITTER CLEANER AND USB POWER FILTER FOR JITTER-FREE DATA EXCHANGE AND AN ABSOLUTELY STABLE PULSE
High-resolution digital audio signals, in particular, need both a precise and stable pulse as a basis for high-quality D/A conversion as well as clean, interference-free 5 volt power supply. In addition, the USB interfaces on computers and notebooks are susceptible to electromagnetic interference and signal noise. The Oehlbach PureClock eliminates the pulse dithering known as "jitter" and the high-frequency interfering signals almost completely and guarantees perfect synchronisation between the USB interface and the converter.
HIGH-QUALITY ANALOGUE DIGITAL CONVERTER WITH OPTICAL TOSLINK AND DIGITAL COAXIAL OUTPUT
The Oehlbach AD Bridge provides for the high-quality conversion of an analogue electrical signal into a digital signal . After conversion, the audio signal streamed via stereo RCA can be emitted via the digital coaxial output or the optical TOSLINK interface, with a sampling rate of 96 kHz. Responsible for the high-quality A/D conversion are precise, stable Cirrus Logic Chips.
This compact PowerLan HDMI Extender allows you to transmit a HDMI signal without any loss via the existing electric circuit. The HDBit transport protocol makes it possible to transfer a video resolution of 1080p up to 300 m without any additional cables.
Wireless subwoofer extender for loss-free wireless transmission of a subwoofer signal.
The Falcon Sub Wireless Subwoofer Extender allows loss-free wireless transmission of a subwoofer signal at a range of up to 15 m, providing a high degree of flexibility for the subwoofer set-up location. The transfer in the 2.4 GHz wifi range enables extremely low latency of less than 20 ms and ensures high connection stability. Absolutely precise signal transmission guarantees clean, highly-detailed, finely structured reproduction with no ground loops. The compact device has low power consumption and also features an auto-standby function.
Despite its compact dimensions, the Oehlbach BTR 4.2 Bluetooth transceiver offers a wide range of possible applications. The 2-in-1 adapter allows audio signals to be sent and received wirelessly via Bluetooth. Audio signals, which are either transmitted in analogue format or via the optical digital input, can be sent to compatible headphones or active speakers via the current Bluetooth 4.2 protocol. When the receiver mode is activated, the BTR 4.2 receives the Bluetooth signal from a mobile device or computer and then outputs the signal via the transceiver´s integrated 3.5 mm jack interface. With support for aptX and Qualcomm True Wireless Stereo, as well as an extremely low latency of less than 40 ms, Oehlbach´s BTR 4.2 is capable of delivering an outstanding acoustic performance in any situation.