A sampling rate of up to 384 kHz and a 32-bit sampling depth are supported by the XXL DAC Ultra headphone amplifier from Oehlbach via USB. The housing is equipped with premium quality Burr Brown digital/analogue converters for absolute signal purity and optimum acoustic performance. Whether it´s used for sophisticated over-ear or compact in-ear headphones, the XXL DAC Ultra is the perfect partner for the connected headphones. In addition to the USB connection there is also an optical and coaxial digital input as well as analogue RCA inputs. Playback is reproduced via two 6.3 mm jack outputs as well as RCA outputs.
This compact PowerLan HDMI Extender allows you to transmit a HDMI signal without any loss via the existing electric circuit. The HDBit transport protocol makes it possible to transfer a video resolution of 1080p up to 300 m without any additional cables.
HIGH-QUALITY ANALOGUE DIGITAL CONVERTER WITH OPTICAL TOSLINK AND DIGITAL COAXIAL OUTPUT
The Oehlbach AD Bridge provides for the high-quality conversion of an analogue electrical signal into a digital signal . After conversion, the audio signal streamed via stereo RCA can be emitted via the digital coaxial output or the optical TOSLINK interface, with a sampling rate of 96 kHz. Responsible for the high-quality A/D conversion are precise, stable Cirrus Logic Chips.
THE PURECLOCK JITTER CLEANER AND USB POWER FILTER FOR JITTER-FREE DATA EXCHANGE AND AN ABSOLUTELY STABLE PULSE
High-resolution digital audio signals, in particular, need both a precise and stable pulse as a basis for high-quality D/A conversion as well as clean, interference-free 5 volt power supply. In addition, the USB interfaces on computers and notebooks are susceptible to electromagnetic interference and signal noise. The Oehlbach PureClock eliminates the pulse dithering known as "jitter" and the high-frequency interfering signals almost completely and guarantees perfect synchronisation between the USB interface and the converter.
The Falcon HD Wireless HDMI Transmitter guarantees loss-free wireless transmission of HDMI signals in FullHD and 3D. Transmission of the entire 1080p information with very low latency of less than 0.5 seconds is ensured over a range of 30 m with a clear line of sight. In addition, IR signals from the remote control are also transmitted reliably. The Qualcomm Atheros chipset provides for the necessary processing power for the wireless transmission is an optimum manner. The PureVu CNW8302 FullHD media processor ensures loss-free video processing in precise detail. It goes without saying that the Falcon HD is HDCP-compliant and energy-efficient. Thanks to its compact dimensions, it offers many varied set-up options and flexibility.
Scope of delivery: Falcon HD transmitter, Falcon HD receiver, IR emitter with 2.5mm jack plug, IR receiver with 3.5mm jack plug, 2 x HDMI cable – 1.5m, 2 x 5V DC power adaptor
It is not without good reason that the AR9374 wi-fi chip from Qualcomm is the first choice in any devices with high demands concerning data throughput, range and operating stability for wireless data transmission. Its extremely compact format allows the problem-free elimination of any scattering signals, meaning that it can be integrated into our high-quality Oehlback products. With dual-band wi-fi 802.11n, signals up to 300 Mbit/s are transmitted, with the AR9734 providing excellent signal stability even at maximum range.
The Phono PreAmp Pro from Oehlbach integrates your record player with an MM or MC cartridge into existing high-quality hi-fi components without a dedicated phono input. The low-noise pre-amp is fitted with gold-plated contacts to guarantee a stable and reliable connection between the phono device and the hi-fi system. Equipped with an external power supply, the Phono PreAmp Pro weights just 100 g and easily fits into any hi-fi rack thanks to its compact design. The individual components are connected via analogue stereo RCA connectors.
The Oehlbach Optosel 4:1 receives up to four digital optical signals and transmits these unprocessed to an AV receiver. The switch box is perfectly suitable for combining with AV receivers, which only offer one single TOSLINK slot. The device, which is set in a solid metal enclosure, supports sampling rates and a resolution of up to 92kHz/24 bits. This absolutely guarantees high-quality and loss-free signal transmission. Both compressed and non-compressed audio signals are supported. A remote control for convenient changing of the inputs and a power supply unit are also supplied with the device.
Converting digital optical signals into digital electrical signals without any loss of quality is the speciality of the Oehlbach Digicon O/C audio converter. The compact device, weighing in at just 62 g despite the solid metal enclosure, converts compressed and non-compressed audio signals, supporting a sampling depth of up to 24 bits. Stringently selected electronic components guarantee loss-free signal transmission. The 24-carat gold-plted contacts ensure perfect contact reliability.
The 3-star Oehlbach Digicon C/O converts a digital electrical signal into an optical signal. A coaxial and an optical connector are incorporated into the solid metal enclosure of the Digicon C/O for this purpose and these are plated with 24 carat gold to ensure maximum transmission and contact reliability. The Digicon C/O converts compressed and non-compressed audio signals up to a sampling depth of 24 bits. Thanks to stringently selected electronic compenents, the conversion process is absolutely loss-free and guarantees outstandingly high quality of the converted output signal.
Oehlbach´s extra-class DA converter converts digital into analogue audio signals. High-resolution encoded signals are received through a coaxial or optical input. The desired input may be set with a switch and the signals will then be output through a two-channel RCA output. A high-quality Cirrus-Logic chip inside the device is responsible for loss-free digital-to-analogue conversion. The handy DA converter is suitable for PCM-format audio sources and supports audio signals up to 192 kHz/24 bit. A USB connector or mains adapter may be used as the power supply.
The Oehlbach Audio XT enables the audio track to be decoupled loss-free from a complete HMDI signal and, separated from the video signal, be transmitted to another device. The output of the audio signal ensues digitally via the optical output or analogue via a stereo 3.5 mm port, with maximum resolution of 192 kHz. This means that the Audio XT is also perfectly suited to the high quality of the loss-free compressed audio formats. The video signal is then transported untouched to a connected image display device via the HDMI output. The elaborate electronics are located in a compact, solid metal enclosure. High-quality 24 carat gold-plated magnets guarantee maximum transmission reliability.
Oehlbach´s extra-class DAC Edition 40 converts digital into analogue audio signals. High-resolution encoded signals are received through a coaxial or optical input. The desired input may be set with a switch and the signals will then be output through a two-channel RCA output. A high-quality AK4396 chip inside the device is responsible for loss-free digital-to-analogue conversion. The handy DAC Edition 40 is suitable for PCM-format audio sources and supports audio signals up to 192 kHz/24 bit. A USB connector or mains adapter may be used as the power supply.
One of the most important steps in high-quality music reproduction is the digital-analogue conversion of electrical signals. At Oehlbach, we therefore only use strictly selected components with technical properties of above-average quality. The AK4396 D/A converter is suitable for high resolution sampling rates up to 192 kHz/24 bits and produces only minimal non-linear distortions despite the huge frequency range. The extremely high tolerance to digital jitter is another distinctive feature of the D/A converter from Asahi Kasei. In addition to PCM, 1 bit DSD data signals, needed for the perfect reproduction of DVD audio and SAC media, are also processed.