Gold GXW-15

Apraksts

The GXW-15 is a brilliant example of state-of-the-art subwoofer design. In a gloriously glossy, rigid compact enclosure, we've installed an ultra-long throw 15" C-CAM bass driver, triple suspended for a full 38mm (1.5") of linear excursion. Featuring a massive magnet structure, and under the DSP control of a 650W D2Audio® DSP controlled amplifier, this extraordinary deep bass generator brings a new dimension to bass, and reference results for SPL, dynamic control and headroom.
It may deliver taut gut-churning bass all the way down to a seismic 18Hz, but the GXW-15 is also an intelligent design, featuring an advanced automatic room correction system LEO™ (Listening Environment Optimizer). LEO simply and automatically eliminates the detrimental bass boost of boundaries and corners through the use of a microphone and test tones.
The GXW-15's sealed enclosure and front firing driver make it easy to install. Calibration from the front-mounted controls and dimmable LED display is simple, even from a distant position. It's equipped with a 12V trigger and remote control with four user EQ pre-sets.

Specifikācijas

System Format:    Sealed Cabinet. 25mm M.D.F construction with internal bracing. Sealed amplifier compartment
Low Frequency Limit:    18Hz
Upper Frequency Limit:    40 - 120 Hz Variable
Low Pass Filter Alignment:    Active 4th order 24dB/octave (6/12/18/24dB user adjustable)
Amlifier Power Output:    650 watts Continuous. 1200 watts (peak)
Amplifier Classification:    D2Audio™DSP controlled, Class-D amplifier system. High current switch mode power supply (smpsu)
Equalisation:    4 Settings (Off/Music/Movie/Impact)
Phase Control:    0-90-180-270 degrees
Auto Sensing Input Level Requirements:    Line Level >2mV. Standby after 10 minutes if no signal sensed
Digital Volume Level:    -60 to +10dB in 1dB increments
Drive Unit Complement:    1 × 15" C-CAM® sub-woofer driver featuring triple suspension and 3" long throw voice coil
12V Trigger Input:    3.5mm mono jack socket
Connections:    Stereo RCA in/out; LFE in/out; 12V Trigger in (3.5mm mono jack); LEO - 3.5 mm Microphone input jack (microphone supplied)
Input Impedance:    20kOhms
Dimensions H×W×D:    430 × 400 × 400 mm;  Grille Depth: 28mm
Weight (unpacked):    35.3kg
Mains Input Voltage:    100-120VAC/ 220-240VAC 50/60Hz (factory preset)
Electrical Certifications:    CE/CB/ETL/Fcc/ErP (Energy saving compliant)
Power Consumption:    Max. 1000W. Standby < 0.5W (ErP Compliance)
Fuse Type:    20mm UL/VDE (Value is region specific)
IR Remote Control Code:    NEC SH6122